We Regent Steel Inc Have Monel 400 and Monel 500 In Ready Stock.
₹ 1,200 /Kilogram Get Latest Price
Thickness | 0.5 mm |
Material | Monel 400 |
Grade | Monel 400 |
Material Grade | Monel 400 |
Type | sheet |
Size | 1. mm to 1000 mm |
Minimum order quantity: 20 Kilogram
We are remarkable entity, engaged in offering an excellent gamut of Monel 400 Sheet. Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions,This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions,
₹ 1,200 /Kilogram Get Latest Price
Thickness | 1 MM TO 50 MM |
Material | MONEL |
Grade | MONEL 400/500 |
Material Grade | MONEL |
Type | Monel 400 (UNS No. N04400) Monel 500 (UNS No. N05500) |
Size | AS PER REQUIREMENT |
Minimum order quantity: 30 Kilogram
Our Monel Sheet are of premium quality and optimal cost. Our Monel Sheet & Plate are subjected to the standard processes and parameters before delivery which ensure zero defects and wider acceptance. These Sheets are worth to be purchased.
₹ 100 /Piece Get Latest Price
Grade | Monel |
Size | 1 inch, 3/4 inch, 1/2 inch, 3 inch, 2 inch |
Usage/Application | Structure Pipe, Pneumatic Connections, Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe |
Material | Monel |
Elbow Bend Angle | 60 Degree,30 Degree,45 Degree |
Type | Tee, Elbow, Reducer |
Minimum order quantity: 10 Piece
Types of Monel Fittings: Elbow 90 deg, Elbow 45 deg, Cross, Tee, Coupling, Half Coupling & Cap
Range: 15 NB to 100 NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75
We are offering a complete range of Monel Fittings which is a copper nickel alloy and are available as per the following specifications:
₹ 1,000 /Kilogram Get Latest Price
Material | MONEL |
Material Grade | MONEL 400/ 500 |
Usage/Application | Manufacturing |
Grade | Monel 400 (UNS No. N04400) |
Size | 10 MM TO 200 |
Product Type | MONEL 400 |
Minimum order quantity: 50 Kilogram
We are suppliers and stockiests of Monel Products like Tube Pipe Round Bar Rod Sheet Plate Coil Foil Fittings Busbar Flat Angle Channel Other Products available in all grades Dimensions and as per requirements of the industry
₹ 950 /Kilogram Get Latest Price
Material Grade | MONEL 400 |
Grade | MONEL |
Material | MONEL ROD 400 |
Size/Diameter | 1 inch, 1/2 inch |
Size | 10 MM TO 200 |
Usage/Application | Manufacturing |
Minimum order quantity: 50 Kilogram
We Regent Steel Inc is one of the leading manufacturers, suppliers and exporter of Monel 400 Rods.A solid solution alloy (Monel 400) that can only hardened by cold working. Monel 400 exhibits characteristics like high strength, toughness, good weldability and good corrosion resistance.
Chemical Composition:
Monel 400 | Ni | Fe | C | Mn | Si | Cu | Al | S |
63.0 min | 1.0–2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0–34.0 | 0.50 max | 0.02 max |
Technical Specifications:
Monel 400 Standards | |
UNS | N04400 |
Werkstoff Nr. | 2.436 |
Mechanical & Physical Properties – Monel 400 | |
Density | 8.8 g/cm3 |
Melting Point | 1350 °C (2460 °F) |
Tensile Strength | Psi – 80000 , MPa – 550 |
Yield Strength (0.2%Offset) | Psi – 35000 , MPa – 240 |
Elongation | 40% |
BHAVESH JAIN (PROPRIETOR)
Regent Steel INC
Office No.107 ,1st Floor ,Building No. 21/23 ,Lakadawala Sapphire , 4th Kumbharwada
Mobile 92777-77000, Mumbai - 400004, Maharashtra, India